Features of Obstetric Central Monitoring System
Friendly interface and easy operation for User.
Large-sized CRT displays patients’ physical parameters in colors.
Graphic trends for fetal heart rate, Toco, heart rate, RESP rate, SpO2, pulse rate and NIBP.
Waveform freezing and analysis functions.
Storage of NIBP data and FHR, Toco, HR, TEMP, SpO2, PR, RESP rate for tabular review.
S-T segment automatic detection and display (need support from specific bedside monitors).
Rich alarm limits settings.
Network Connecting
Serial connector and networking link selectable.
Bidirectional signal transmissions between central unit and bedside monitors
Switching between 4 beds and 8 beds according to actual monitored bed number.
Communication speed: Each channel 9600bit/s;
Communication distance: ≥50m
Power Supply
Power consumption: ≤150VA；
Main unit power: Single phase AC 220V/50Hz；
Continuous working time: 240 hours.
Composition
Main unit: 1 Set, see the following Reference
Central System Software: Windows XP + SP1 patch operating system
Jet or laser printer (optional) for output of trace and text.
Hardware Configuration Reference
Computer Configuration
Motherboard: With PCI slot, AGP bus & INTEL chipset
CPU: P4 1.7G or higher
RAM: 256M DDR or larger
Hard Disk: 40G or larger
Display: 17” CRT Color Display
Display Card: AGP Bus / 32M Display Card
Power Supply: Input 220V～50Hz,3.0A Output 220V～50Hz,2.5A
Cabinet: Vertical or Horizontal
Sound Card: Yes (Any model, better independent type)
Floppy Drive: 1.44M 3.5’’
CD-ROM: Yes (Any model will do)
See also: PC-6000, PC-1000 | 
